If you want to transform the house’s interiors and change them in a unique way, wall paneling is a good option. Adding charm can transform a boring or basic home into a stylish one. Wall paneling is a more accessible and cheaper way to rejuvenate the house. If you want to give an exciting look to the house so, wall paneling from skirting world is a good option. There are numerous designs and styles are available in the market, and they also add a classy finishing touch to the house. These wall designs are usually made of MDF (Medium density fiberboard) which can prevent the damage and protect the home.
What are the requirements to panel a wall?
No matter what is the size of the room, wall paneling can add character, depth, and warmth. It transforms the space into a classic feature wall. There are some essentials requirements before you start:
- A spirit level
- MDF wood paneling
- Cutter and saw
- Decorators caulk
- Paint
- A pen and notebook to note downsizes
- An electric sander and sandpaper
- Pin
- Hammer
- Tape measure
- A calculator
Step 1: Complete planning
It is significant to prepare and plan the wall before starting the panel a wall. If you have already designed, so it is easy to execute the plan. Remember one thing; always be clear about the idea of how the wall panel will look after the change. For this, you can sketch the idea down in the notebook, which will help you execute the plan step by step.
Step 2: Measure the wall
Before starting to panel a wall, firstly, you should check the requirement of MDF wood pieces. Then, if you measure the wall, so it is easy to order the exact amount of MDF wood for the walls. One of the complicated parts of paneling is measuring. So take the time to do this.
- The wall that is decided to panel measures its full height and width using tape.
- Some people prefer to panel half the wall; on the other hand, other people want to panel the complete wall, so decide how many pieces of panels are required.
- Consider accounting for horizontal and vertical panels as well as base and top panels (the frame)
Before starting the panel, check the wall’s condition and ensure that the situation is good. Next, check the quality of panels and use that panel that gives accurate finishing to walls. Finally, clearly write down the measurements and carefully follow the step to the panel.
If you measure the wall one time, recheck it. It is essential that measurement is accurate and the panel size ideally fits in the space. Also, considering the distance will help to understand the requirement of panels.
Step 3: cut the panels to size.
The right time to cut the panels relies on the wall size and how many panels are required to complete the project. You can call a professional to cut the panels, or even you can cut. At 90 degree angle, use a mitre saw and circular saw box and carefully cut the panels placed horizontally.
Cutting the MDF panels according to size can be scary, but there are various ways to cut the MDF wall strips according to your preferred measurements. But, of course, it totally relies on the tools which you use.
The difference between a circular saw, and a Mitre saw.
The circular saws are handled by hands, but miter saws do accurate cut or fix cut. There are a variety of different ways to cut by using a circular saw. One advantage to using a circular saw is that it is very cheap in price, while the miter saws are quite expensive.
If there is only a requirement to cut or trim the strips, a circular saw is a better option. If these options are a cakewalk for you and if you feel confident, there is an option to use a knife or blade to trim or cut the panels. It would be best to sand all the ends until the MDF panel strip has been trimmed down smoothly.
Step 4: smooth and sand the walls
To smooth and sand down the walls, you should either use an electric sander or sandpaper. Before attaching the panels, prepare the walls by smoothing and sending them down. The reason for doing this is it removes any bumps and lumps, cracks, and holes. Even if you don’t notice small holes, they can be sanded and filled. For removing gaps, cracks are a good option that considerable because professionals use them.
Step 5: Fix the panels to the wall
The style you choose to panel the wall will decide how to place the panels on the wall. To make symmetry, always start from the wall’s middle. For example, you can add a frame in the start and on the wall which is marked placed the panel on it. On the wall, apply adhesive solid and make sure to leave to dry and press down firmly.
You should add vertical panels in starting, followed by horizontal panels. Before drilling or nailing into the walls, use a cable detector or pipe. If there is no surety about the safety of nailing on the wall, so you can prefer strong adhesive instead.
Step 6: Check the gaps and fill them
There is a need to inspect the wall panels for gaps if they are dry and firmly fixed to your walls. Some gaps which need to fill in the walls. For filling the gap, you should consider decorator caulk; it is an easy option to fill the holes and cracks.
To fill the sides of the wall, if there are any gaps or halls that appear, you can cover them with the use of paint. If the panels you used are a little millimeters tiny, don’t worry about this; you can quickly fill the wall with Polyfilla. Once the wall is filled, sand this down for the entire look.
